Blog

Water Heater Repair Warren MI Blog

Our blog is designed to give homeowners as much information on general plumbing repair tips, not just Warren water heater repair advice.  Many home plumbing maintenance tasks homeowners can be well equipped  to take care of themselves.  Enjoy!

The Great Water Heater Temperature Debate

Posted by on Jan 26, 2014 in Water Heater Repair Warren MI | 0 comments

There are varied views on what is the very best temperature level at which to set ones water heater. Water Heater Repair Warren MI will be sharing some of the different views with particular proof from those sources in order for one to make his/her own decision on the topic.Water Heater Repair Warren MI

To begin with, the default setting most water heater manufacturers have their tanks set at is 140 degrees. If you have never checked this already, that could be what it is set at. Also, it can be difficult to know for sure what the temperature setting is because sometimes the temperature dial does not have actual degrees printed on it, simply warm, hot, really hot … something to that effect. Some people feel they are pre-set at a higher temperature level so it feels excellent to have a great deal of hot water – type of like trying to create good brand awareness in consumers.

In regards to energy savings, by turning a water heater down from 140 to 120 degrees, it will conserve in between 6 to 10 percent of energy usage. That equates to in between $6 to $20 a year most of the time.

Let’s begin off with the most likely the most renowned source, the U.S. Department of Energy. They suggest a setting of 120 degrees. The link with their website above provides a great deal of good info on the best ways to minimize ones hot water usage and costs. It is definitely worth a read.

Now for the health threats of too low of a temperature level setting. It can be revealed that Legionella bacteria has the optimal growth range between 68 to 122 degrees. Treehugger states that “25 percent of all water heaters have differing levels of Legionella bacteria contamination.”

According to The National Center for Biotechnology Information: “There are two opposing risks when it comes to water temperature inside domestic water heaters; exposure to Legionella, the bacteria responsible for Legionnaires’ disease (pulmonary legionellosis), and the risk of scalding.” (read more…)

Legionella bacteria triggers a kind of pneumonia and is passed to people when one breathes in water contaminated with the bacteria – usually in showers, whirlpool baths and even a/c systems. Drinking the water is generally ok. It is an issue with having the germs get in ones lungs.

The Centers for Disease Control and Prevention estimates 8,000 to 18,000 Americans contract the condition yearly. 5 to 30 percent of the cases are deadly.

According to the Occupational Safety & Health Administration, here are some of the factors that can increase the risk of getting the disease:

  • Organ transplants (kidney, heart, etc.)
  • Age (older persons are more likely to get disease)
  • Heavy smoking
  • Weakened immune system (cancer patients, HIV-infected individuals)
  • Underlying medical problem (respiratory disease, diabetes, cancer, renal dialysis, etc.)
  • Certain drug therapies (corticosteroids)
  • Heavy consumption of alcoholic beverages

Cases to not have the water heater temperature set at 140 degrees would be if there are kids in your home or possibly with elderly individuals too. The threat of being burnt if the faucet was completely on hot water can be too great. Obviously, any individual living in the home that is at risk of contracting Legionella Disease must have it set at 140.

Summary

So choose if there are any concerns of individuals burning themselves if the water temperature is too high. Likewise, be mindful of any individual who has issues of contracting Legionella Disease. Given that the annual cost savings of turning the temperature down is only about $20 most the time with the typical home’s hot water use, it may be an excellent choice to keep the temperature level above 120 degrees just for the health related benefits; nevertheless, Water Heater Repair Warren MI will let you make the call.

The following two videos demonstrate how to adjust the temperature level on both an electric and a gas water heater in case you are unsure the best ways to do so.

How to Change the Temperature on an Electric Hot Water Heater

How To Change The Temperature On A Gas Water Heater

Read more articles in our blog.

How to Flush a Warren Water Heater

Posted by on Jan 17, 2014 in Water Heater Repair Warren MI | 0 comments

Ok, so it is not an attractive water heater upkeep task, however it does need a little cleaning up from time to time. Yes, today Water Heater Repair Warren MI is going to advise one on ways to eliminate a water heater. Some suggest doing this when every one to three years, we feel it is best to do so as soon as a year. Doing so is not a difficult or time consuming project – heck, let the kids aid even.

Why Flush a Warren MI Water Heater?

If it is last the advised life expectancy of the unit, it should have some sort of routine flushing done. Doing so will obviously assistant in having it run as successfully as possible, which also means saving money on the cost of running the darn thing. That alone ought to be a sufficient reason we feel!

In terms of water heater maintenance, flushing it will do away with the buildup of mineral deposits that natural occurs inside the water tank. If one has ever had loud noises, popping, gurgling, mini-explosion sounds, that is an indicator that there is too much sediment inside the tank. This flushing procedure will help see to it that the tank warms water a lot more quietly.

Step 1. If it is an electric water heater, turn the power off in the primary electric breaker box and turn the cold water supply off. If it is a gas heater, it is ok to leave the gas on – simply turn the water off. Though, turn the thermostat setting dial to the pilot setting (make a note to remember exactly what it was initially set at though for later on). Then, whichever faucet the water heater supplies is closest requires to be opened. This is generally much easier than opening the pressure relief valve, but one can do that instead.Water Heater Repair Warren MI

Step 2. At the bottom of the water heater is a drain valve that a garden watering hose can be attached to. There might be a cover over it depending upon the maker. Think about turning the heat to the pilot setting a number of hours prior to flushing it if one wants so the water isn’t going to be as hot when it is drained. If that is not an option that’s fine, just make sure the garden hose made use of is in good shape to endure the greater temperature water.

Run the hose outside far from your home or if the water has already cooled, one can drain the tank into buckets.

Step 3. Open the water heater’s drain valve and begin draining the water. For whatever reason the drain valve is usually made of plastic, so if one has an older water heater (and one that has actually not been drained since before time started) it may stick a little. Just be mindful to not break the plastic (which is why it would be nice if the darn thing was NOT made from plastic).Water Heater Repair Warren

Once the drain valve is open, likewise open the pressure relief valve on the heater. Water will (at least it must if it pressure relief valve is working effectively) stream some from it. Try to let is flow stable and not too fast so it stirs up the sediment in the water heater. We want the sediment to drain out the bottom through the hose.

If draining in a container, even if having the hose drain into a bucket beyond the garage or basement where the water heater is found, fill a bucket and let it sit to see if the water is clear or if there is sediment, which will typically look like sand in the bottom of the bucket. Just keep draining it till the water is clear.

Step 4. Close the drain on the bottom of the storage tank and close the pressure relief valve if it is still open.

Step 5. Turn the water supply on again to fill the tank. As soon as it is full once more, slowing open the pressure relief valve once more to get some excess air out of the tank. Then, open a hot water faucet in the house to obtain even more air out of the system.

Step 6. Let the hot water in the bathtub run till a complete stream is streaming out. Once that occurs, it is ok to turn the power back on if it is an electric water heater, or reset the temperature setting for a gas water heater. Certainly, turn the bathtub faucet off. In about 20 minutes, the hot water ought to be heated up once again.

There you go! Water Heater Repair Warren MI is here to address any concerns you could have. Next take have a look at our article on what to do if one has no hot water.

Enhanced by Zemanta

Troubleshooting No Hot Water from a Water Heater

Posted by on Jan 15, 2014 in Water Heater Repair Warren MI | 0 comments

Let us break down the conversation on why one may not have any hot water from the water heater into two different parts: having NO hot water and having LIMITED hot water.

No Hot WaterGas Water Heater Repair Warren

In regards to having no hot water at all, Water Heater Repair Warren MI recommends that it is most likely because of one of the following four various possibilities (a minimum of it is most likely simply one). Right here they are …

A Bad Pilot Light
Ideally this is the case since it is the easiest of the five to take care of. First check to see that it is still lit. One might have to take a look at the owners handbook (sorry men, however in some cases we require to review instructions) if you are having a tough time finding where it is located. Manufacturers due have a tendency to hide them nowadays it seems. And, to see what the manufacturers directions are for relighting the pilot light.

Gas Line Leak
If one has a gas water heater, there may be a leak in the line. If one has an electric one, undoubtedly overlook this as a possibility. Some people have a difficult time smelling gas, though my mom has an extraordinary ability to smell it I vividly remember as a child. It most likely will have the odor of rotten eggs. If this is the case, all jokes aside, turn the gas line off if one knows where it is and call the gas company and/or a plumbing business if one doesn’t reside in Hot Water Heater Repair Warren MI’s service area. This is a severe issue that needs instant attention!

A Bad Thermostat
This could be the concern for both not having any hot water, or just not having enough hot water. To be on the safe side we included it in this section though. Make certain the thermostat dial settings have not been bummed or changed by mishap. Our water heater is found in the garage and the happy fingers of twin children like to go discovering now and then. If the
settings are exactly what they generally are, turn the establishing some and see if it does the trick. The thermostat can be changed for they do put on outoccasionally.

A Bad Thermocouple
For gas water heaters, the thermocouple works in hand with the pilot light as a safety device. If the pilot light is out, it prevents gas from being switched on, so it is type of important. However, uncomplicated to alter if required. When the thermocouple starts to break, it “tells” the gas valve that the pilot is out so it shuts off the gas. The burner will not light then and the pilot light goes out.

For electric water heaters, it uses a heating element inside to perform the electrical current heating the water. These can likewise wear out and will bring about minimized hot water.

Not Enough Hot Water

Sediment Buildup
If one is not in the practice of flushing the water heater tank occasionally, like at least once every couple years, sediment from the water will buildup in the bottom of the tank. If one ever hears popping or banging sounds from the tank, that is most likely why. This will ultimately lower the heaters ability to make sufficient hot water. Regular flushing will generally fix this problem. If the water at home is extremely hard, making use of a water softener will help fight an excess amount of sediment buildup too.

Other Possibilities
There might be a concern with the flame from the burner. Please make sure the area around and below the water heater remains clean from dirt. The water heater pulls air up from underneath for the burner. Natural gas flames will burn bright blue with a yellow tip, while propane are more bluish green on the body of the flame.

It might hold true that the tank size is just too small and not able to handle the water heating demands, but undoubtedly if it is a brand-new problem of insufficient hot water and ones usage level has not drastically increased, this will not be the case.

If any recent repairs were made on the device something can be crossed in regards to the electrical connections or the hot and cold water connects, but again, quite unlikely from the majority of plumbing companies.

There are other possible causes, however for the sake of time right here, Water Heater Repair Warren Michigan just wished to share the most probably ones. Do not be reluctant to let us know of any assistance required!

Video Overview of Water Heater Repair Warren MI

Posted by on Jan 9, 2014 in Plumbing Repair Warren MI, Water Heater Repair Warren MI | 0 comments

We just made a brand-new business video summary for Water Heater Repair Warren MI and we wished to share it with you today. Do not be reluctant to call us for any plumbing repairs and installations that you may have to have performed at work or at home.